Designed Around Everyday Cabin Comfort
Small gaps around a door can make the cabin feel less sheltered. This rubber profile is designed to help close suitable gaps, supporting a more comfortable interior when fitted correctly. The result depends on the condition of the existing seal, the selected profile and the quality of installation.
Two Profiles, Clearly Defined
Choose between 12 × 11 mm and 15 × 14 mm cross-sections. These measurements describe the shape and size of the seal itself, not the amount supplied. The larger profile is a different fit option; it is not a confirmed heavy-duty grade or a guarantee of better performance.
Order the Length Your Project Needs
Measure the full route you intend to seal before choosing a roll. The 12 × 11 mm profile is available in 5 m and 12 m lengths, while the 15 × 14 mm profile is available in 5 m and 16 m lengths. Coverage depends on your vehicle and fitting route.
A Fit That Respects Your Door
Compare the profile against your existing seal and available clearance before installation. Test a short section and check that the door closes and latches normally. A correctly chosen seal should sit neatly without excessive compression or interference with drainage openings or moving parts.
Built for Real Drivers
A closer seal. A more comfortable cabin.
Bring a more considered finish to your car’s door surrounds with a flexible rubber seal designed to help close suitable gaps. When correctly matched and fitted, the profile can help limit draughts, wind noise and the entry of dust or rain around the sealed area. Choose your seal profile first, then the available roll length: 12 × 11 mm comes in 5 m or 12 m, while 15 × 14 mm comes in 5 m or 16 m. The millimetre measurements describe the seal’s cross-section; they are not the roll length or a heavy-duty rating. Measure your existing profile, available clearance and fitting route before ordering to select the right combination for your vehicle.
Key features
- Flexible rubber profile follows suitable door contours for a neat, close-fitting seal.
- Designed to help reduce draughts and wind noise caused by gaps around correctly fitted door seals.
- Helps limit dust and rain entering around the sealed area when the profile fits correctly.
- Choose 12 × 11 mm or 15 × 14 mm: these are cross-section dimensions, not roll lengths.
- Available combinations: 12 × 11 mm in 5 m or 12 m; 15 × 14 mm in 5 m or 16 m.
- Measure your seal profile and door clearance before ordering; compatibility depends on your vehicle.
Designed Around Everyday Cabin Comfort
Small gaps around a door can make the cabin feel less sheltered. This rubber profile is designed to help close suitable gaps, supporting a more comfortable interior when fitted correctly. The result depends on the condition of the existing seal, the selected profile and the quality of installation.
Two Profiles, Clearly Defined
Choose between 12 × 11 mm and 15 × 14 mm cross-sections. These measurements describe the shape and size of the seal itself, not the amount supplied. The larger profile is a different fit option; it is not a confirmed heavy-duty grade or a guarantee of better performance.
Order the Length Your Project Needs
Measure the full route you intend to seal before choosing a roll. The 12 × 11 mm profile is available in 5 m and 12 m lengths, while the 15 × 14 mm profile is available in 5 m and 16 m lengths. Coverage depends on your vehicle and fitting route.
What's Included
- Choose between 12 × 11 mm and 15 × 14 mm cross-sections. These measurements describe the shape and size of the seal itself, not the amount supplied. The larger profile is a different fit option; it is not a confirmed heavy-duty grade or a guarantee of better performance.
Choose your profile and length
| Seal profile | Available roll lengths |
|---|---|
| 12 × 11 mm | 5 m or 12 m |
| 15 × 14 mm | 5 m or 16 m |
Both options are black rubber. Profile dimensions describe the cross-section and are separate from the roll length. Neither option is assigned a verified heavy-duty rating. Your order supplies the profile and length selected; it does not include both profiles.
A Fit That Respects Your Door
Compare the profile against your existing seal and available clearance before installation. Test a short section and check that the door closes and latches normally. A correctly chosen seal should sit neatly without excessive compression or interference with drainage openings or moving parts.
Before fitting
Measure the existing seal and fitting route, check door clearance, and follow the supplied fitting instructions. Test the fit before completing installation. Keep drainage openings clear and ensure the door closes and latches without force. This is not a guaranteed universal replacement for every vehicle or a repair for damaged door alignment. Noise reduction and weather resistance depend on fit and installation; the product does not make a vehicle soundproof.
Delivery & Returns
Shipping & Delivery
Free UK shipping on all orders, with an express option available at checkout. We get every order out reliably and efficiently.
Returns & Exchanges
Enjoy hassle-free returns and an easy exchange process. Not satisfied? We'll issue a full refund, no questions asked.
Need Help?
Our MotorSupply support team is here to help. Reach out anytime and we'll get back to you.
- Secure Checkout
- Free UK Shipping
- Easy Returns
- Quality Guaranteed
